Operation Manager-Right Click Menu X7

[Brewster]

Is anybody else experiencing a 10+ second delay when right clicking in the operations manager? Everywhere else the right click menu pops right up almost instantaneously.

[Loader]

hmmm.. strange for me.

 

I have almost same configuration as you, just 2.8 Xeon, and i get it in ...2sec...

[Brewster]

hmmm.. strange for me.

 

I have almost same configuration as you, just 2.8 Xeon, and i get it in ...2sec...

Ok thanks. I will continue to look into this. it isn't anything major but it does get frustrating creating new toolpath groups and naming nc files.

[RayD]

are you righclicking inline with the "toolpath"? If yes you are reloading the NCI for Verify.. very annoying

[Brewster]

are you righclicking inline with the "toolpath"? If yes you are reloading the NCI for Verify.. very annoying

 

No just anywhere in the op manager. the menu pops up just fine in the workspace and any where else. oh and I agree with you on the "toolpath" = open verify

[Jayson Kramer]

Work just fine here about 2 dec.

[Brewster]

Work just fine here about 2 dec.

hmm. must be something with my pc or setting because it takes 8 to 15 seconds to pop up even without a part file loaded