BUG - Applying custom drill parameters

[Guess_who]

OK, I did a quick search and didn't see this reported yet. I am hoping someone can give me a quick work-around.

 

The issue is that when I turn on the custom drill parameters, it doesn't stay on. I click the box, hit apply and then "ok". When I go back into the operation the check mark is removed.

[Guess_who]

Sorry, I was in a hurry.

 

Using X7-X64-pc1 - Posted 05-05-13

[Roger Martin from CNC Software]

Ray,

 

>> When I go back into the operation the check mark is removed.

 

I did a search and see that this issue has already been reported.

I'm not positive, but I don't believe there is a work-around.