X-7 verification

[AEP]

I just started using X-7, I exclusively program 5 axis mill turns. I am having ALOT of issues with the verification bombing out on multi axis tool paths. Back plot, and even part programs are fine, We have actually run several of the programs I could not get to verify..

 

errors are 1) bad allocation

2) Could not create a solid-intersector for a tool element in SimulateToolElement_OnListSurface0!

 

These seem to be the 2 I see most frequently, anyone have any ideas?

Thanks for the help!

[AEP]

Found part of the answer to my own question. Once verification launches, if you go to File- options-general-simulation engine- and select 5 axis... it works much better...

[Patriot]

I'm working for a new company and having the OP's issues as well. Tried his solution to no avail.

 

Any suggestions or solutions? 

 

 

 

FYI I've been using X7 since it came out and never had this issue at the previous place I worked. However; I am now on a 32bit system instead of 64, for the time being. Has me wondering if it's a machine def issue, or computer issue..

 

Also, it's a couple basic 3axis contour tool paths on straight lines.