Dynamic contour with finish pass

[Jrygus]

I can't find any mention of this in a search. Was hoping someone could see if they have a similar issue, or perhaps know what I am missing. I am doing a dynamic contour with a 1/2 bull endmill in a closed pocket. Kind of like a re-machine after a 3/4 tool has roughed it out. I turned on finish passes in the dynamic contour operation using wear offset and a lead-in/out with the settings as you see in the picture. I cannot get a ramp lead-in or lead-out. I have tried it in X6 MU3 and X7 MU1

[Jrygus]

Here is a file with the operation. Cannot get a ramp lead-in on the finish pass

NO RAMP.MCX-6

[Rotary Ninja]

That's weird. I have only used the dynamic contour a couple times and I never noticed that. I can't get it to ramp either. Maybe it doesn't work in the dynamic paths. I would suggest leaving the finish off and just add a contour path with your ramp settings.

[Jrygus]

That's weird. I have only used the dynamic contour a couple times and I never noticed that. I can't get it to ramp either. Maybe it doesn't work in the dynamic paths. I would suggest leaving the finish off and just add a contour path with your ramp settings.

 

Yeah, that is what I was going to do. Thanks for checking it out.