DMU 1035V 4th Axis Air

[rogkick]

Hi,

 

anyone know off the top of their head what the M Code is for activating the air for a 4th axis attachment?

As I patiently wait for the (lack of) service techs to get back to me....

Thanks

[CJep]

Are you referring to the air brake? I know in Fanuc it an M10 / M11,...

[rogkick]

I am referring to that, on The Siemens S840D SL, there is a menu to enable the 4th axis, then allow an M10/M11 to on/off the air....but nothing seems to activate it.

If I enable the 4th axis....it requires referencing, naturally. And if I MDI the M10/M11....no air comes out of the nozzle.

I want to use that air port to drive a vacuum chuck