Makino PRO 5 FTP

[Acro Engineering]

I know this isn't a Makino forum but hoping someone here can help. Purchased a new F5 and having trouble getting files to copy using the Makino Pro 5 control. I have the ethernet set up and I can see the PC and even the files in the directory. When I try to copy and paste, the controll is sending //filename to the FTP server trying to move up directories causing failure. I go in on the Fanuc side and I can delete files but it doesn't give the options of read or punch?

[Redfire427]

We have a seamless set-up on our Makino F5. We just drag and drop our nc files onto the Makino data server ( on the control ) and then execute them up from the schedule list.

 

Carmen

[Acro Engineering]

When I try to drag and drop, the CNC is sending //filename to the PC which is telling the FTP server to move up two directories instead of just copying the file from the current directory. I thought it might be a parameter value that is telling it to send the // but can't locate any parameters associated to FTP that would do this?

[Acro Engineering]

Found the problem. Wish the technician knew more about the machine when they install everything...