G54.2 P# with G54.1 P# DYNAMIC OFFSETS

[DPARKS]

Does anyone have any code examples for outputting Dynamic work offsets using the MPMaster post? I would like to be able to access all avalible offsets at my machine Toyoda FH550SX Fanuc 31i Model A.

 

I have 8 Dynamic offsets avalible and 48 extended (G54.1P#) offsets that stack on top of the dynamic:

 

In G code:

 

G54.2P1 (P can be 1-8)

G54.1P1 (P can be 1-48)

 

Would a string table keying off of a logical numbering sequence in the work offset dialogue work?

 

Anyboy have any example code on implementing this in the MPMaster post?

[crazy^millman]

This is more of a posting question than a Nethook or VB question. Hopefully it gets moved to the correct forum for this type of question.

 

HTH

[DPARKS]

Sorry,

 

I am new to this forum thing must have posted this in the wrong place. Can i move my post or do I need to repost?

[crazy^millman]

Looks like you will need to repost since it has not been moved by this point.

 

Also any sample code for what you are looking for will be a great help.