why MCX7 MU1 ignore some place of milling?

[yestwp]

it confuse me much, the right upper side will be ignore automatic.

 

I USE peel mill.

 

could anybody help me, please?

 

any help is thankful.

 

 

 

 

CONFUSE.MCX-7

[Richard Thomas - Mastercam UK]

With Peel Mill the chains should be parallel and should not touch (the chains should be side-by-side).  Now even though I say this, I have got the toolpath working by changing the chains so that they are the same length and touch in the middle (but this is still not the way the toolpath is designed to work).

CONFUSE_4D.MCX-7

[yestwp]

With Peel Mill the chains should be parallel and should not touch (the chains should be side-by-side).  Now even though I say this, I have got the toolpath working by changing the chains so that they are the same length and touch in the middle (but this is still not the way the toolpath is designed to work).

great!

 

thanks a lot

[xycnc]

I got this to work using peel mill I tried to replicate what your picture looked like and show what I did. Hope this helps

Side note peel mill is awesome!

[Brewster]

Try this video. It shows the various ways a peel mill toolpath can be chained.