Small, but annoying issue...

[Drunken_Master]

Hello,

 

I am using X7 and every now and then, I accidentally click an icon and drag which pulls parts of my tool bars out of position.  Is there a lock that can be toggled on and off somewhere in the settings for moving tool bars?

 

Thanks!!

[CADCAM3D5AXIS]

go to a blank spot on the tool bar area and right click and then the box shows up at the bottom click on customize tool bar states and pick one of the names in the list like 3d tool paths or name one so you know its yours  and make it the default name. Make sure you have the tool bars were you like them before you do this   then hit save and make sure your name is the default it wll have asterisk next to it and then save it again and green check out  and off you go. the next time the tool bars go south you can right click a blank spot and load tool bar states and pick your named tool bar and load it and then you should be good to go.After a while this also can add in right click items for most used tools so you can use them with the rightclick button anywere . search for right click items in the tool bars and see some of the settings others use.

HTH

[Drunken_Master]

Alright, I will give that a shot.  Thanks!

[Jayson Kramer]

Sorry there is no way to actually lock the tool bar location.