Rotate offsets

[rrichard]

Morning everyone,

 

    I have an A axis rotating part here drilling and tapping an OD, I did a hole axis on my solid model with points, did my drilling and tapping on the Top Plane, all positions and rotation is perfect, only I don't understand why when posting it changes many of my offsets to like G55; G56, etc.?

   I included a zip2go if anyone interested in looking at my little dilemma.

 

  Thank you for any feed backs

 

Rotate.Z2G

[Guest]

When you use, z2g, make sure you save your file first...everything is in your z2g except your part file  

Typcially, if you're using transform roate, make sure your base path is set to your offset, usually, 0 instead of -1

 

Then in your transform pick the Maintain source WCS offset

[rrichard]

Thank You JP,  I'll  give that a shot

Thanks

Russell

[K2csq7]

I got a file?

Kinda looks like a lathe chuck body?

 

Select all ops, right click, edit common parameters, planes, check the box for work offset. set it to zero, green check out, regen & post. 

 

I get nothing but G54.

[rrichard]

Yes changing to "0" did the trick

Great Guys "thanks -a-lot"

Russell