toolpath multiaxis flow . . . crashing on verification

[mcdoggie]

i'm trying to work on a project using toolpath-multiaxis-flow

it shows funny result on verification operation

 

i tried different adjustment on parameter but won't work

however whenever i dissable the roughing-depth cut

the verification operation seems to work okey.

 

but the roughing shoul not be dissable because of the needed materials to be cut

 

any help will be appreciated. see attached file

contorl panel crash toolpath.mcx-8

[stephensburta]

hello, see this solution 

 

contorl panel crash toolpath_test.mcx-8

[mcdoggie]

thanks step

safety zone does the wonder :-)

[stephensburta]

 

[MrFish]

you might want to try using stock model too as this will save you some time with air cuts

contorl panel crash toolpath_test.mcx-8