Mastercam Books for Integrex

[David Colongioli]

Hi,

 

Im looking to get some books from here to learn how to program a e670h Integrex.

 

Looking at the different books, i didnt want to buy any that wouldnt help me with this machine, so im asking for some advice. I have very little mastercam experience, any help would be appreciated.

 

I have mastercam x8 and the mill/turn option.

 

Thanks!

[Colin Gilchrist]

If you have "little Mastercam experience", then there is no single book that will teach you how to program for that machine. Programming any Mill-Turn machine would be difficult without knowing the basics. You need to learn 2D, 3D, Lathe, and Multi-Axis programming in Mastercam, then you can learn specifically how to run Mastercam for your machine.

 

It will also depend on having a good post for your machine, as you'll need to use the controls inside Mastercam to get good code output. I'd highly recommended getting some onsite training with the company providing your post.