Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi,
Im looking to get some books from here to learn how to program a e670h Integrex.
Looking at the different books, i didnt want to buy any that wouldnt help me with this machine, so im asking for some advice. I have very little mastercam experience, any help would be appreciated.
I have mastercam x8 and the mill/turn option.
Thanks!
It did exactly what i expected it to. It went in at the contour that i chained.
What i want it to do is go in lets say 0.25" and rotate 360 degrees, then down a percentage of my cutter width and rotate again roughing the cut out.
I do realize its doing what i asked, i just cannot find anywhere in the settings to tell it to do what i want.
David.
Yes i am aware i need more training. Are there any other books other than the Lathe course offered here that goes in depth without having to travel and participate in a classroom?
The emastercam lathe book never made mention of this particular setup, however it did offer a wide range of examples.
David
I just finished the Mastercam X5 Lathe training book i got, and went to program some milling on the face contour and it just does the line, without turing the caxis.
Lets say i wanted to mill out a bowl on the lathe using a 1" diameter cutter, if i was to chain the drawing it would just cut the path of the chain, what am i missing to get it to rough it all out using c axis?
Thanks in advance,
David.
Seems im unable to delete my post but i think i got it figured.
I had to click edge curves on solid import on "converters" setting
Anything else i should checkmark in there if i will be doing alot of importing of step files?
Hello, i am using Mastercam X5 HLE and when i analyze the solid its just saying "closed solid body" and doesnt let me pick a single entity.
I use mastercam x4 at work and the default settings allow me to do this.
Any idea how i can change it so i can analyze the line properties in X5?
Thanks!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.