X9 - Post Z level clearance of 89 inches above part??????

[MIKO ELLO]

I installed X9

 

Opened a repeat job that was in X7.

 

I made a couple changes to add a slot

 

I posted and everything looks good except for the machine over traveled in Z

 

I looked at the post and it show Z89.99 inches above the part

 

I have tried several posts and they all post the same

 

I checked my program and it looks fine at 2" above part

 

My WCS is set correctly

 

Is anyone else having this sort of problem?

 

Thanks

 

 

[CADCAM3D5AXIS]

Hi Miko

have a look in your lead in lead out settings and see if your helix height has anything other than 0 in there that could be your issue.Your pic looks like what i had last year and i could not find it for the longest time but set them both to zero and see if that works for you .

HTH

[MIKO ELLO]

WOW!!! all these years of programming and I made the simplest mistake every!!

 

Thanks for catching that for me...

 

I didn't look and typed in 90 thinking degrees for my lead in and lead out