Toe Clamps to hold down Kurt Double-Lock vise.

[Mic6]

I'm looking for toe clamps to hold down the said vise.  I can't find them on Kurts website or MSC.  I found these from Glacern in a search, but I was wondering if there is an official Kurt part #.

 

Boss doesn't want me to make them, so here I am.

 

[Rick46]

I use those self adjusting hold downs that have  a swivel nut in the center to hold our vises down. not sure of part number but I know MSC carries them as well as other tool vendors.

 

https://www.mscdirect.com/browse/tn/Clamping-Workholding-Positioning/Adjustable-Self-Positioning-Strap-Clamps?searchterm=hold+downs&navid=4287922195

[Mr. M]

I think teco had something close but no cigar. Chick has them but I couldn't find a pn so I ended up making some

[Mike@Lustre]

2nd for Chick we have them for our double vises

[jeff]

 

 

Boss doesn't want me to make them

 

Seriously? It's a 15 minute job to make those.