EApprentice

[javi11]

good morning everyone!

 

so I am thinking of purchasing the advance multi-axis package from eapprentice, but I am wondering if anyone here has ever purchased it? and if so how helpful was it? do they go over every multi-axis option?

 

thank you!

[MSL]

Yes, It's well money spent. 8 hours course is not enough for multiaxis, but Colin did a great presentation and covered pretty much most of multiaxis options.

[Sarabjit Mann]

their web site does not have anything for mastercam training any more unless I am pointing to wrong web site, I am trying at :

eapprentice.net

[Guest]

their web site does not have anything for mastercam training any more unless I am pointing to wrong web site, I am trying at :

eapprentice.net

 

Yup, they have gone to Autodesk HSM....no longer a Mastercam option

[Jayson Kramer]

Look at Mastercam U or Streaming Teacher.

[Jayson Kramer]

PS there is a new multiaxis class coming for 2018 right after it goes public.

[Sarabjit Mann]

I am too cheap to spend money and this was one of the real lesser expensive way to learn 5 axis MasterCAM, too bad it is not available any more, I was going to get monthly training subscription for this and learn at my own with the help of these instructions and guidance. Unless you guys can direct me to some other place for this.

[DanielGingras]

I am too cheap to spend money and this was one of the real lesser expensive way to learn 5 axis MasterCAM, too bad it is not available any more, I was going to get monthly training subscription for this and learn at my own with the help of these instructions and guidance. Unless you guys can direct me to some other place for this.

Hello Sarabjit,

 

We actually offer a streaming Mastercam Multiaxis course here: http://www.emastercam.com/board/ecourses/ecourse/46-mastercam-2017-multiaxis-essentials-ecourse/

 

$149 for the course and your access to it never expires. As long as you have access to your eMastercam.com account you can come back to review the course at any time.