Active Reports - Ops List - Drill Point Count

[PMDc]

I am in the process of developing an Operations list and would like to include the drilled hole count for the machine operators to verify all holes exist.

 

I do not see this in the xml list. Is there another way to get geometry data from drill ops for my report?

 

Thanks!

[jlw™]

I always put that in my comments. Having said that I can't help with active reports but suggest using comments.

 

Mine will read along the lines of:

 

(tap drill 6x 21mm minor for M24)

[PMDc]

Good suggestion. I am looking for automated output. Our customer revises hole counts routinely and want to make use of the file data and not rely on user input.

 

Thanks!