fanuc post config the order of tool in Fanuc Post.

[[email protected]]

Hi guys. 

 

I have a Fanuc post. I wanna optimize the NC file  as below : 

 

O0000

G21

G0 G17 G40 G49 G80 G90

( MACHINE GROUP-1 )

T1  (a)

M6

T2  (b )

G0 G90 G54 X50. Y10. S3500 M3

G43 H1 Z25. T1

Z10.

G1 Z0. F3.6

X40.

G3 X30. Y0. R10.

G1 Y-22.5

G2 X25. Y-27.5 R5.

G1 X-25.

G2 X-30. Y-22.5 R5.

G1 Y22.5

G2 X-25. Y27.5 R5.

G1 X25.

G2 X30. Y22.5 R5.

G1 Y0.

G3 X40. Y-10. R10.

G1 X50.

G0 Z25.

M5

G91 G28 Z0.

G28 Y0.

( MACHINE GROUP-1 )

T2 ( b )

M6

T3 (c )

G0 G90 G54 X50. Y10. S3500 M3

G43 H2 Z25.

Z10.

G1 Z0. F3.6

X40.

G3 X30. Y0. R10.

G1 Y-22.5

G2 X25. Y-27.5 R5.

G1 X-25.

G2 X-30. Y-22.5 R5.

G1 Y22.5

G2 X-25. Y27.5 R5.

G1 X25.

G2 X30. Y22.5 R5.

G1 Y0.

G3 X40. Y-10. R10.

G1 X50.

G0 Z25.

M5

G91 G28 Z0.

G28 Y0.

M30

%

 

 

the position of the next tool like this. Anybody can give me some ideas to config the post file . Thank you. 

[Guest]

Your reseller in Vietnam should be able to fix this for you in 5 minutes

 

You should contact them first

[Newbeeee™]

Or the official mastercam site.

www.mastercam.com