Deckel Maho DMC 103V connect to PC

[Cy4]

Hello

Can someone help me how can I connect my Deckel Maho DMC103V with my PC/Laptop so I can transfer programs into machine?

[Matthew Hajicek - Singularity]

What kind of ports does it have?  USB, flash card, serial?

[Cy4]

17 hours ago, Matthew Hajicek™ - Conventus said:

What kind of ports does it have?  USB, flash card, serial?

rs232 25 pin 

[Matthew Hajicek - Singularity]

In that case, to go to a laptop you need this:

https://cnc-specialty-store.com/rs232-cables/ultimate-rs232-cable-kit-and-usb-serial-pc-adapter

If you have a desktop available you can get a serial card for it, but you'll still need an appropriately wired cable.  This is what I have set up to get DPRNT data out of the machine for probing.

[Cy4]

On 6/3/2017 at 1:51 AM, Matthew Hajicek™ - Conventus said:

In that case, to go to a laptop you need this:

https://cnc-specialty-store.com/rs232-cables/ultimate-rs232-cable-kit-and-usb-serial-pc-adapter

If you have a desktop available you can get a serial card for it, but you'll still need an appropriately wired cable.  This is what I have set up to get DPRNT data out of the machine for probing.

it have an ethernet port 

[Cy4]

and is Siemens Sinumerik 840D

[Guest]

21 minutes ago, Cy4 said:

it have an ethernet port 

What Matt posted is what you want....

Since the machine has a serial port, the computer/laptop needs to utilize an adapter on it's end to have the ability to speak to the machine...

Most reliable is USB to Serial

Edited June 4, 2017 by Guest

[Matthew Hajicek - Singularity]

If you mean the machine has an ethernet port then you may be able to use that, but I wouldn't be able to help you set it up.

[Grievous]

That's a Sinumerik controller from what I see in that pic. Don't complicate things with serial connections, not that you cannot do it... but why? Imagine you want to connect to computers so you can share files between them.

The easiest way is to change your machine IP based on your network settings and share some folders with write permission and you are set. ("f$\dh\wks.dir",  "f$\dh\mpf.dir " and  "f$\dh\spf.dir")

Log in 1st as manufacturer by choosing password soft key (user=AUDUSER pass=SUNRISE) via start-up menu, then also from start-up menu choose MMC/Dos shell and type explorer or control panel and enter...you will be after that in like in windows and you will be able to change your IP.

 

 

[Cy4]

Thank you to everyone for the help. I will try to connect the machine with my Laptop soon.