Mill tutorial 15-exercise 1

[s0l0seven]

Hello I am a student who is using the Mastercam Mill Training Tutorial V8. I have a question about a surface problem I am having (I don’t know witch one to use) can you help. It's the one right after Tutorial 15. Mill tutorial 15 exercise 1

Thank you

 

[Mike Freimann]

I don’t recognize the name of that book.

It will help if you give the ISBN number.

There are lots of MC tutorials.

If you are referring to Mill/Design Applications Guide.

That file already contains the required surfaces.

They are in C:Mcam8CommonTutorials

I will be happy to help.

Please clarify the name of the book.

Mike

 

[s0l0seven]

ISBN: 1-894487-04-4 (THE SAME ONE SHOWN AT THIS WEBSITE)

[Mariana Lendel In-House Solutions]

If you are refering to Mill Training Tutorials, the surface type that you have to use on exercise 1 of tutorial 15 is coons.(No Automatic coons chaining, using the point at the bottom of the "spoon" as the fourth side; 4 patches in the along direction 1 patch in the across). It's kind of similar with the step-by-step tutorial.