multi-surface question

[Joeyls319]

Good Morning folks,

I got a quick question that I'm sure one of you can answer. I'm going across the top of a angled surface that is radiused at one end. I used multisurface 5th axis on. It works great. My question is , is there a way to have it make one pass instead of three? I can edit it out in the editor, but it would be better if I could just post out the one pass. Any help would be appreciated.

 

Thanks in advance.

 

Joey

[Jayson Kramer]

So this is a 5 axis cut?

I am little confused by your statment.

 

Can you eather share the file or show a snap shot to see what you are cutting to better answer this.

Most likely be a better path to give you what you want.

[Joeyls319]

Jay

sorry it took so long. I don't have access to the ftp. site here at work, and I can't seem to get any pictures to paste in.

 

I'll keep trying though.

 

Joey

[Joeyls319]

Jay

I can probably e-mail you the pictures if your still interested in helping.

 

Joey