Error RS 232 DNC FADAL 88

[rafajel0]

Hi to everyone and Happy Christmas.

I have a problem in communication of PC (my laptop) to Fadal VMC 88.

In this week I tried send code with the comand DNC and I have a problem. 
I use CIMCO edit 7 to sent gcode to my machine with the comant TA,1 and this send the gcode perfect with bautios C,7 (because with C,8 the machine show me a error in the communication). 
When a sent the same code in comand DNC with bautios (C,7) this sent the code but show me error in communication RS-232.

I don't have idea why!!!! I try with other range of bautios (lower) and show me the same problem.

In the pictures I show the configuration of my CIMCO 7 and the wires what I use.

If someone can share his configuration of CIMCO, it would be great.

[Jayson Kramer]

You must. It pUT the USB to serial drivers in or just did not pick a Com port. Not all off the brand USB to serial adapters work. Also the default setting for fadal in the port setting are 7,even ,2,9600.

We're did the cable from the DB9 to D25 cable come from.

So start by making sure the computer sees the adapter and that it assigns a Com port to it like Com 3 exp.