Mitsubishi FA10 Wire EDM Rs-232 issue

[Chris Parish]

Hello:

Were switch from using the floppy disk to the Mits FA10 Wire EDM. We want to start using the RS 232  to communicate.

The problem is that the machine is "dropping" everything in parenthesis and also dropping the equals sign in the offsets

see below

%
(L564)
(PART NAME)

H1=.0189
H2=.0155

N110 G92 X0. Y0.
N120 G0 X0. Y0.

The control changes it to the following:  ( Using RS232... the floppy works just fine)

%
*564*
*ART NAME*

H1.0189
H2.0155

N110 G92 X0. Y0.
N120 G0 X0. Y0.

 

On the mits screen, using RS 232 parameters the is EIA equivalent codes for parenthesis, equal sign etc... does any body use those, if so what are they  set to ? Please let me know.Thanks.