2019 Patch 3.1 Readme

[Slepydremr]

I can't seem to find a readme on what was changed with Patch3.1 for 2019 that was released today. Can anyone point me in the right direction?

[Chris Parish]

supposedly it has to do with brining in the latest solidworks files.  not much to read up on it though.

[Pete Rimkus from CNC Software Inc.]

2019 Update 3 already supports import of the latest SolidWorks (2019) files.

From the Mastercam forum post re: 2019 Update 3.1 :

"...Due to the Automatic Update System problem in which users without active maintenance were being prompted to install Mastercam 2019 Update 3, we have made Mastercam 2019 Update 2.1 as an intermediate patch to fix theAUS. Mastercam and Mastercam 2019 for SOLIDWORKS Update 3.1 can be installed from either Update 2.1 or Update 3 so it is not necessary to uninstall Update 3if it is already installed. See the Knowledge base article regarding Mastercam 2019 Update 3.1 upgrade paths for more information. In addition to the AUS changes, Mastercam and Mastercam 2019 Update 3.1 for SOLIDWORKS has two new bug fixes that were not included in 2019 Update 3:

1. S-61377/D-36307/R-18638 - 2019 Update 3.1- Planes- Custom Plane Origin jumping when deleting geometry.
2. S-62463/R-19021/S-62463/S-62169 - Mastercam for SOLIDWORKS is occasionally using periods as decimal places when not specified in Windows Regional Settings.

This update installs directly on top of 2019 Update 2.1 or 2019 Update 3 and is available through the Update Manager. The 2019 Update 3.1 download will also be available from the Support/Downloads section of the website at https://www.mastercam.com/en-us/Support/Downloads. This is a Mastercam and Mastercam for SOLIDWORKS only update. For a detailed list of what issues have been addressed in Update 3 please see the attached ReadMe files. ..."