C axis milling and turning verify issues

[Jcncprogrammer]

Im new to mastercam c axis programming. Im working with a shop that has a haas st20y 4 axis lathe. Im doing a simple 3/4 hex program in mastercam 2017. My issue is before i add the milling toolpaths to the lathe, the turning tools come up in the correct orientation on verify simulation, but when i added the mill contour to cut with the side of the end mill (could not find any c axis cuts that would do what i wanted) and then try to do a verify simulation my lathe tools come in at a crazy orientation. When i suppress all the milling and try to run the sim, everythings good, but when i try to run it all it screws up the orientation of the turning tools in the verify simulation, i think it has something to do with the planes. Any help would be appreciated. thank you. heres the file if you want to look at it

 

Lathe hex drive.mcam

[crazy^millman]

3 hours ago, Jcncprogrammer said:

Im new to mastercam c axis programming. Im working with a shop that has a haas st20y 4 axis lathe. Im doing a simple 3/4 hex program in mastercam 2017. My issue is before i add the milling toolpaths to the lathe, the turning tools come up in the correct orientation on verify simulation, but when i added the mill contour to cut with the side of the end mill (could not find any c axis cuts that would do what i wanted) and then try to do a verify simulation my lathe tools come in at a crazy orientation. When i suppress all the milling and try to run the sim, everythings good, but when i try to run it all it screws up the orientation of the turning tools in the verify simulation, i think it has something to do with the planes. Any help would be appreciated. thank you. heres the file if you want to look at it

 

Lathe hex drive.mcam

This is a known bug, Ignore the backplot when together. Post the code and call it a day.

[Jcncprogrammer]

Thank you Ron, your awesome!