FBM Drilling Issue

[SteveReid]

Hi Folks,

I am using Mastercam 2019, and having a few issues with the FBM Drill;

I want to Spot Drill and Drill holes, our Spot Drill has no Thru-spindle coolant but I want to use thru-spindle coolant on the Drill, I dont seem to be able to turn on the thru-spindle coolant for one tool (Drill) only, when I turn on in the Drill parameter page of the Drilling Cycle when I regenerate, it turns off (ingore) the thru Spindle coolant.

I cant find how to change the Drilling Cycle, I want to use a "universal pecking Cycle" but again every time i regenerate the FBM it reverts back to a "universal Drilling Cycle" 

Appreciate any help!!