Thanks  @JParis 

There is no option for Canned Text option or  a Misc Int/Misc ... on this post.

I guess i will have to ask for special of my dealer.

Hi there 

Hello everyone!
I recently upgraded to a NAKAMURA TOME AS-200L two-spindle mill-turn

Mastercam's post for the machine is excellent, but at the moment I have not yet found the option of using a part catcher.

Do I have to enter the code manually?? Or is there a relevant icon?

Would appreciate help!!

Hi there

Hello everyone.
I run into a serious problem when I try to drill small diameter deep holes in polycarbonate. Drills with a diameter of 1-2 mm at depths of 40-60 mm. The diameter of the hole is not uniform, and the surface finishe quality is not satisfactory.

what can be done? I would appreciate advice from the experts.

what extra lengh drills are reccomended?

feeds and speeds? pecking??

thanks!!

post Scriptum. It is about both CNC milling and CNC turning

Hi everybody.

Just got my new DT-1 Haas.

How can i set G187- pP3  E0.015 mm as default tolerance for all surface finish operations? For now i m changing tolerance individually for every operation.

What should i change on machine/control definition?

Thanks in advance

Tamir