Moldplus products have been released for Mastercam X6.

The release version numbers are:

Moldplus V10.5 MR2 SP1

Moldplus CATIA Translator V4 SP1

ProDrill V4 SP1

Separate 64-bit and 32-bit installs are available for all our products.

All these installs were updated on February 3, 2012. If you do not have access to the customer download site, please contact your reseller for the details.

Thank you for your patience.

Anbu

Moldplus SA

The Mastercam surface normal setting feature functions well for what it is designed for. It allows you to select all surfaces and set the normals relative to the current Cplane direction.

The ability to set all surface normals independent of plane direction is one of many tools that Moldplus software offers. For the world of 5-axis machining as well as to write/export correct STL files with all faces pointing in the outward direction, this tool comes in handy.

If you have to to set normals on lots of surfaces regularly, the solution is available today from us and should be worth your time and money. You can purchase the Moldplus 5-axis Toolkit alone. Check out our web site and videos related to the toolkit on that page. You can also try out our software if you prefer.Moldplus 5-axis Toolkit

The different software levels we offer allow you to invest in just the right solution/s needed for you. You can upgrade at a later stage if you want more tools.

Moldplus software has been offering advanced surface design, modeling, manipulation and repair solutions for Mastercam users for more than 16 years. Such tools and solutions are developed based on user requests and feedback and continue in the same manner.

Regards

Anbu

Since you have Moldplus, you could also use Junction Surface, Link Edges and close the hole in 1 click. The Link edges will make a closed link of any open boundaries (if they can be closed).

FYI, I have moldplus and it does a great job zone splitting with one down fall

 

'Sometimes' you will open up a file and it will say '138 corrupt entities not brought in'

Then the file opens and half your surfaces are gone but the paths are not dirty., bigger pain in the xxxx

if you just leave it and then an engineering change comes in.....bummer

 

So I do it the long way because mold plus and take just as long to fix a bug and then

it shoes up in the next release.

 

The 3rd part blues....

Hi Rick

Thank you for being a Moldplus user.

If you have issues with entities being corrupt after using Moldplus, please send the files to [email protected] for review. Provide us the steps to reproduce the error and we can check out what is going on. We keep track of all issues reported and our development process is designed to ensure that old bugs are not repeated for newer versions.

Regards

Anbu

How are you creating your geometry for the Curve 5ax tool path? Adding additional control vectors to the curve could help. Note that Moldplus software now offers some interesting tools to easily create your curves and vectors for Curve 5ax toolpaths. Recreating the geometry and redoing the path with the controls we offer might help you resolve the issue.

Hi

Please download the latest version of ProDrill for Mastercam X5 from January 5th. This issue was resolved in the latest installation.

Regards

Anbu

Moldplus V10.5 MR1 for Mastercam X5 has also been released.

Anbu

Doing good Jay. Thank for asking.

Anbu

ProDrill V3 and Moldplus CATIA Translator for Mastercam X5 have been released. Moldplus for Mastercam X5 is still being completed.

Ways/tricks to use your current/existing tools to get your job done are always good! As users, you always find the best ways - no doubt and no arguments.

Our solutions are beneficial for clients needing to create the surface boundary/part edges of several surfaces in one click - as 3D o 2D edges. Same works for single surfaces also.

Regards

Using Moldplus - you can create 3D part-edge curves OR 2D part-edge curves on a desired plane.

No need to create all edges of all surfaces.

Please contact your local Mastercam reseller for more details.

Hi

Using Moldplus, you can create 2D part edges(projected as splines, lines OR lines and arcs to a set Z height) or 3D part edges (splines or lines) to create the boundaries for your surface models.

Once that is done, you can use the Mastercam offset contour feature to create the contours with the desired offset for your 2D contours.

Please check with your local Mastercam reseller for more information regarding Moldplus.

Regards

Hi

With Moldplus (add-on for Mastercam), you can perform Draft Angle Analysis. In addition to analysis, the surfaces are also trimmed using the analysis angles if needed.

Works in Mastercam 9.1

Regards

Hi

Please note that there is no feature recognition from CATIA V4 files. Therefore, no drill features (reamed and tapped holes) will be marked when importing the CATIA file. CATIA V5 files however will work.

You can still set the reamed and tapped holes using the Set Features functionality of ProDrill.

Any questions, please contact your local reseller or email the file to [email protected] with the type of drilling work that needs to be done. The more the information, the better. Also, if you did review the ProDrill Quick Start Guide, you should be able to use the software to give you the results you want.

Regards

Hi

You could always do this without the need for creating edge curves, un-trimming, etc using Moldplus trimming functionalities. The Zone Split function or Plane Trim will do exactly what you are looking for.

Regards

Hi

Moldplus uses a different CATIA translator source in comparison to CNC Software. We released our product recently (just a few months ago), in comparison to CNC Software that has had the product out for a while. Based on when you purchased the translator, CNC Software's solution was probably the only one available and that is why your reseller recommended and sold you that solution.

We have provided a solution for importing CATIA V4 data into Mastercam for many years. We do not deliver a product in the market unless we feel confident that it is reliable, cost effective and gives you the results you are looking for. That is the reason why we waited this long to provide a solution for importing CATIA V5 data.

We will continue to stay current (providing solutions as fast as possible) for the versions released by CATIA V5.

Check with your reseller and fellow Mastercam users on our background and commitment to providing quality solutions.

Also check with your reseller as to when you will have V14 support for the CNC Software CATIA V5 translator. They may not be too far with that.

Regards

Hi

If you would like us to process a CATIA file using ProDrill, we can do that for you.

Using the CATIA V5 translator from Moldplus, we automatically identify tapping and reaming features and mark them to be readily processed by ProDrill. All drill forms will be optimally processed.

You can email inquiries or your CATIA V5 files for testing to [email protected] or simply contact your local Mastercam reseller.

Dont forget that we have a special offer for all this till the end of this month!

Regards

Hi Doug

The information on our site is a bit outdated. I will fix that now.

Yes, we do support V5 R14 CATPART and CATPRODUCT files.

Regards

Anbu

Hi

Please contact your reseller for a newer update for the same. If you are on the Maintenance program and have MR0105, they may have a newer patch for this issue.

Regards

Anbu

Hi Thad

We dont have a Moldplus version that runs only in demo mode.

I would encourage you to contact your reseller - Axsys to find out what's new and get trained on the product. There are a lot of new features in Moldplus 9.2 that are worth learning about.

I will work with your resellers to see how we can improve the learning tools - with videos, etc.

Thanks again for your support.

Regards

Anbu

Hi again

As far as I have tested Moldplus 92035 in MR0105, it works well for me.

I performed the Update installation for MR0105.

Please provide specifics as to what makes it crash.

Regards

Anbu

Hi

We are currently investigating this issue.

If you can email us specific details on which functions crash in Moldplus, we can work on narrowing down that problem. (Emails to [email protected]

I have already responded to you John. Look forward to your reply regarding the Moldplus trial and reseller information.

Regards

Anbu

Hi

We are currently investigating this issue.

If you can email us specific details on which functions crash in Moldplus, we can work on narrowing down that problem. (Emails to [email protected]

I have already responded to you John. Look forward to your reply regarding the Moldplus trial and reseller information.

Regards

Anbu

Hi

Moldplus SA does offer a CATIA V5 Read in addition to the CATIA V4 Read/Write translator.

Please check with your reseller for pricing, etc.

Regards

Anbu

Hi

I use a Dell M60 with the maximum specs - The Quadro Fx Go 1000 card with 128 MB RAM, Centrino 1.7, 60GB HD and 2 GB RAM, etc.

Other than the disadvantage of being a bit heavier than its other competitors such as the IBM ThinkPad with the ATI OpenFire GL 128 MB card and similar specs (and 2.2 lbs less), this is a good investment. As mentioned before, Mastercam works better with NVIDIA cards than ATI's.

Pricier also without a doubt, but Mastercam and Solidworks run fine on it. If you need it for Solid modeling or surface modeling and 3D machining, worth it.

Regards

Anbu