Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
What I did was: 3Dconnexion control panel-Button configuration-Custom functions. I deleted all of the recorded functions and then reloaded what I wanted including the operations manager. I have never had a problem after that.
Mastercam is the only one that changes on me both here at work and at home (not the same botton). After reading this search topic I was just wondering.
http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=019154
dprovast71 I will look into that.
I hope these questions qualify for the Mastercam Forum.
I am wanting to machine S-7 hardened to 54-56 Rc for a HSM/Hardmilling test. The size of the blank is 6" x 6" x 3/4". The size and depth of the cavity is 5" x 5" x 1/2" deep with a star shaped boss 3/8" tall from the bottom of the cavity.
My questions are: Should I rough/semi-finish the blank first before heat treating, then finish machining after heat treatment? Or, can I have the whole blank hardened, so I can hard machine to finished size.
As of right now I plan on using OSG exocarb end mills with air coolant/chip removal and a high performance holder.
I have no experience with tool steels or heat treating, so bear with me on these questions.
Thank you in advance for any help.
Ver 9.1 mill Level 3 with solids
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.