Lorsal117
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Lorsal117
-
-
Quote
nope, i'm using wear comp
-
i there. today i'm trying to generate a contour of an hole but when i send it to the mill, the program generate an error about the G41
this is the code:
G0 G17 G40 G49 G80 G90
T15 M6 ( TORO 16 )
G0 G90 G54 X102.5 Y138.5 S2800 M3
G43 H15 Z100. M8
Z1.
G1 Z-10. F800.
G41 D15 Y137.5
G3 X107. Y142. I0. J4.5
X102.5 Y146.5 I-4.5 J0.
X98. Y142. I0. J-4.5
X102.5 Y137.5 I4.5 J0.
G1 G40 Y138.5
G0 Z30.
X161. Y237.
Z1.
G1 Z-10.
G41 D15 X162.
G3 X157.5 Y241.5 I-4.5 J0.
X153. Y237. I0. J-4.5
X157.5 Y232.5 I4.5 J0.
X162. Y237. I0. J4.5
G1 G40 X161.
G0 Z30.The holes are d.20 and d.25 and the tool is d.16 , i read somewhere that a too big tool cause problems
the error code appear after the z-10 movement
heidenhain post wrong axis direction
in Post Processor Development Forum
Posted
hi everybody,
i've a problem with my mill, doosan vmc with heidenhain 530.
when i design the part on the top plane X+Y+ the post work like mirrored, because the nc file is generated with reverse X
ex: a contour line goes from X0 to X100 in Mcam, but the machine do it from X0 to X-100
what's the definition to change in the post file? i'm not so experienced with heidehain
thank you