Ohhh! Sorry, I have found it! Stupid, but I did not see it, right in the middle of the "Parameters" tab in the nest settings.. Yes, it solves a problem too. Many thanks for you!

Yes.. I hoped I can avoid it, but seems it is the only true way. In the post I should look for tool change and then create new program, if so? Or I can change program name inside the post for it to.. Idk what to look for) Maybe there is some guide. I have changed post a few times to recalculate feed or not to post some symbols at start, but never something with file management. LOL! I was not thinking in this way, because there was few times I have paused that mills in operation and they do limit themselves for slow movements and other things, like you can't even update coordinates, not speaking about auto tool length measurements. BUT! If you do stop them with M01 -- it works awesome! Full speed movements, tool measure, flowless! Just going to change post code from TX M6 to M01, maybe it is even posting something like that already, I'll check. Many thanks!

Yeah, I have tried that, it is great, but again: it is not solving my problem. If I'd just translate.. But I have to nest first. If you are translating nest it won't create many programs, you won't be able to change names.

Yeah, I knew that, even written in the original post, the problem is: Transform transforms several operations and different tools, but when you change transform's NC file name it is not assigning unique names to each operation/tool, but only for the transform. So if I'd post something + transform I'd get two progs, but if I have to transform two differently tooled operations with a transform I'd get unique named transform, but in the one prog...

Hello! I have made a little search and can't find any solution, but I think it is very common problem, so it might be helpful, or I am missing something obvious.. I am looking for a way to mill multiple parts, organized on a sheet with CNC mill without tool changer. So, I have written code for each part, nested it with toolpath nesting, and it is very cool and nice to set up, but then I have to post that nest operation, open exported NC file, search for tool change code and separate it into different programs manually. And.. It is OK when you have only two tools, but right now I am reposting 3 tools sheet for the third time, and it is such a pain.. If you are making some mistake.. Pasted block of code with empty line, controller falled into error, have to correct manually again.. How to solve this? Is there any setting, I am missing like a checkbox "post tool into separate file"? Thanks! I have tried to make unique program name for each operation, so it would post into separate files, if I post only one part, but transform and nesting operations kills that feature.