Z2G file for reference... There should be a WCS at the center of the circular sketch. As you can see the Circular sketch was finally imported with the solids history option, but that also imports the rectangular sketch used to make the pocket, which I don't want imported/ visible. 0809 2.377 SSU Block B.MCAM-CONTENT

Hi All, I'm having a new issue where boundary sketches and WCS's are not being imported from solidworks (2022) files into masterCAM 2023). This issue started only this week. previously Mastercam would import whatever sketches and WCS's that were visible when the part was saved. This is no longer the case. I've been in touch with support and haven't gotten a sufficient solution. turning on solids history seems to import the sketch I want, but also every other sketch used to make the part which is undesirable. I have had no success with getting the WCS to import for my part. It was able to import a WCS from a sample part provided by support, but it the orientation was reversed. Any suggestions? Anyone running into the same problems? I know MasterCAM has its own "fully functional 3D CAD" but I am proficient in solidworks, and would very much like to avoid having to learn a whole new CAD program to get around this issue. Thanks in advance, Ryan