lynn vandike
-
Posts
23 -
Joined
-
Last visited
lynn vandike's Achievements
Newbie (1/14)
0
Reputation
-
I wanted to know how to drip feed with mastercam communicatins for x2mr2 to a fadal 4020. I can do it but I want to loop it were I can just hit cycle start on the machine. The way I have it now is I have to walk to the pc and restart the transfer. Thanks a lot.
-
Thanks a lot. I tried to do the spacing angular like you draw a line. They should make it easier to do this. I thought I could just do a simple rotation of a series of numbers to engrave.
-
1.25 rad
-
How do I create letters on a rotation. I can't do it 10 times at 36 degree spacing. 1 thru 10.
-
in x2 mr1 you don't need spaces. in x2 mr2 you need spaces. thanks a lot
-
I can't put the deg/min/sec to the angle. I type 1d59'10" and get a box with-1.0E38 + +1.0E38. I used this function before and it worked.
-
Thanks a lot. I wasn't touching the part from center. You probably have to drop offset half the cutter dia.
-
what is the difference between tip or center of ball end mill in surfacing?
-
Thank you. It worked and you saved me a lot of time.
-
Can I draw in deg. min. sec. or only analyze
-
We bought a used Kitamura with a 0-m control on it. I think it has only 16385 kb on storage. Is there any way to up that with a change in settings or do I have to buy a new board with more memory? The machine is from 93.
-
T don't get a dialog box. The video shows one. I might have to reinstall with x2 discs.
-
Yes. I tried the same as some videos we got. This is the 1st thing that didn't work. I can bring it in with art base suface from image.
-
We updated to add art with x2 and I can't ras2vec. I see the dragon in jpg format but can only bring it in like and image art base. An opening dialog doesn't even open. Any help?
-
The ball screw is metric and was set to inch. The parameters awere set wrong.