ArtemanSteve
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by ArtemanSteve
-
-
Ropteach,
It is very frustrating when the dealers do not respond to questions we ask. I found it is a good idea to go to Mastercams web-site and just poke around, visit the support page periodically this is where I found the sim swap software Haspinfo.exe. Look at it this way, you will have some time to go through X and by then there might be X sp3.
Steve Arteman
College Of Lake County
Certified Instructor
-
John,
Go to screen, config, screen turn off enable open
GL. If that doesn't work turn your Hardware acceleration down.
Steve
-
Son,
Go to screen , confg , screen tab. Turn off enable open GL this should help.
Steve
-
Hi Ruger2,
Typically if you change the path in config. this will change the path on all new parts you create after that change. The parts that were made before this change, the NCI file will go to the NCI folder. Also if you are looking to create the NCI file and nothing is there in the path or folder you created make sure to check the save NCI box when you post the program in the post processing box.
Steve Arteman
-
Surface Fillet Blend In X
Is there a way to do multiple surface fillet blend without hitting the green check mark? Also after I do this and click on mru Icon to create another fillet blend, the setting I used before are lost.
-
Surface Fillet Blend In X
Is there a way to do multiple surface fillet blend without hitting the green check mark? Also after I do this and click on mru Icon for fillet blend the setting I used before are lost is this right?
-
Millingman,
uncheck use passive FTP under internet options, advanced, browsing. this worked for me!!
-
Matt,
Try it, if you have the time. It is very rewarding. Real world parts and examples you have produced can be great reference for your students. You will find a curriculum for your school through your educational dealer. Mastercam Hand book Vol. 1 and Handbook Vol. 2 are good books.
Good Luck!
Steve Arteman
College of Lake County
X9 Window select
in Industrial Forum
Posted
I am not able to use window select geometry with my new dell computer in either X8 or X9, is there a graphical setting that I need to adjust in MC or in the computer.