Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I installed this from downloaded file from Mastercams website should I get disk from my
reseller. Is there anything to watch for when I install. I had this same problem with X2 mr2 sp1.
I'm using Xp 64 bit could that be part of problem.
Thanks
Jeff
Mark, no I can not reproduce this problem it happened to me on three different files but after I fixed operations it don't seem to do it again. I have some files that it never did it on. What do I need to do to send you file.
Thanks
Jeff
HAS ANYONE NOTICED PROBLEM WITH THE NEW HIGH SPEED MILLING CUTTER PATHS. I HAVE STOCK SET AT 0
AND THE CUTTER PATH IS PROCCESSED EVERYTHING LOOKS FINE. WHEN I GO BACK TO THAT OPERATION TO LOOK AT PARAMETERS THE STOCK SHOWS .050. WHEN I BACK PLOT CUTTER PATH IT IS CUTTING TO 0 STOCK. THE OPERATION IS NOT DIRTY BUT IF I REPROCCESS IT WILL CUT TO +.050. THIS ONLY HAPPENS SOMETIMES BUT WHEN IT HAPPENS IT'S ALL HSM PATHS SET AT 0 STOCK. ANY HELP IS APPRICIATED.
THANKS JEFF
USING MR2 (10.2.2.31)
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.