VVV
-
Posts
21 -
Joined
-
Last visited
Never
VVV's Achievements
Newbie (1/14)
0
Reputation
-
i am learning mastercam. now i find a problem. i have set the home position-just the position the tool change, but when i post it, i find no home position. what's the reason.
-
who could tell me where to use the function. or give me a example!! my email is [email protected] thank you
-
when we use mastercam to develop programs for lathe. if the diameter tolerances are different on the out contour, how to set?
-
ha, I of course know where to set these parameter. what i don't know is how to set the angle degree in according to the shape of workpieces. thank you.
-
I want to know the angle relation between the tool and the workpiece. just how to set the degree of angle in some situation.
-
could you give me a example?
-
could you tell me how to get the toolpath picture? it is too useful. another, you don't understand what i means. i want to know what time to set what size of angle.
-
plunge angle xy angle plunge length are there someone to tell me how to set these parameter in surface parallel. just why i need to set these parameter in some situation. thank you.
-
wh can help me?
-
everyone help me to check the file: tutorial3.rar in the following address.(ftp://www.ppcadcam.com/Mastercam_forum/MC9_files/). why i can't write the letter on the surface. i have studied the project for several days, but i can't find the reason. thank you.
-
thank you too much, your experience do a great favour to me.
-
i know its meanings, but i don't know what time to use, or what environment to use. thank you.
-
how to set the following parameter: lead/log angle and tilt angle under tool control parameter in 5 axis multisurface. thank you .
-
I am studying mastercam 9.1 sp2. now I find a problem, could you help me? when I set the lead in parameter in canned rough parameter, i find the "extend start of contour" don't work? even if i set it as 1 inch, i find the toolpath no change? i want to know what the parameter's function is?
-
hi, your idea is very good,could you send your material database>