BEFORE OEM PST FIND PARC #select the arc output if (plane$ = 0 & arctype$ < five) | (plane$ = 1 & arctypeyz$ < five) | (plane$ = 2 & arctypexz$ < five) | full_arc_flg$ | arc_pitch$, [ #Arc output for IJK # If you do NOT want to force out the I,J,K values, # remove the "*" asterisks on the *i, *j, *k 's below... if plane$ = zero, *iout, *jout, kout #XY plane code - G17 <-------------------- here if plane$ = one, iout, *jout, *kout #YZ plane code - G19<---------------here if plane$ = two, *iout, jout, *kout #XZ plane code - G18 <-------------------here !i$, !j$, !k$ <-------------------- here ] else, [ #Arc output for R if abs(sweep$)<=180 | (plane$ = 0 & arctype$ = five) | (plane$ = 1 & arctypeyz$ = five) | (plane$ = 2 & arctypexz$ = five), result = nwadrs(srad, arcrad$) else, result = nwadrs(srminus, arcrad$) *arcrad$ ] BLOCK OR DELETE ALL I J K AFTER if (plane$ = 0 & arctype$ < five) | (plane$ = 1 & arctypeyz$ < five) | (plane$ = 2 & arctypexz$ < five) | full_arc_flg$ | arc_pitch$, [ #Arc output for R ##########REPLACE IJK FOR R copy paste ############################################## if abs(sweep$)<=180 | (plane$ = 0 & arctype$ = five) | (plane$ = 1 & arctypeyz$ = five) | (plane$ = 2 & arctypexz$ = five), result = nwadrs(srad, arcrad$) else, result = nwadrs(srminus, arcrad$) *arcrad$ #Arc output for IJK ##################################### BLOCK IJK OR DELETE # If you do NOT want to force out the I,J,K values, # remove the "*" asterisks on the *i, *j, *k 's below... # if plane$ = zero, *iout, *jout, kout #XY plane code - G17 <------------- block or delete # if plane$ = one, iout, *jout, *kout #YZ plane code - G19<----------------------block or delete # if plane$ = two, *iout, jout, *kout #XZ plane code - G18<-----------------------block or delete # !i$, !j$, !k$ <----------------------block or delete ] else, [ #Arc output for R if abs(sweep$)<=180 | (plane$ = 0 & arctype$ = five) | (plane$ = 1 & arctypeyz$ = five) | (plane$ = 2 & arctypexz$ = five), result = nwadrs(srad, arcrad$) else, result = nwadrs(srminus, arcrad$) *arcrad$ ] it works for me

CAD FILE OR POST FILE SW MASTERCAM X9

i have try that but it still post out go after g01 with feedrate N313 G3 X-1.3854 C.8864 R1.5124 N314 G2 G40 X-1.4776 C.8737 R.0626 N315 G1 Z.1295 F50. ----------------------------------- box rapid retract uncheck N316 G0 Z.1795 ,********** still post out G0 rapid for clearance N317 X-1.1718 C.9853 N318 G1 Z-.341 F6.42

hi need help on C AXIS FACE MILL CONTOUR POLAR MILLING CHANGE RAPID MOVE TO LINEAR MOVE ONLY IN FACE MILL CONTOUR IN TURNING STILL USE G0 prapidout #Output to NC, linear movement - rapid if lathecc = zero, [ if millcc_flag & (abs(cuttype) = four | abs(cuttype) = two) & cutpos2$ = zero, [ if abs(cuttype) = four, [ pcan1, pbld, n$, pexct, psgcode, pcout, e$ pbld, n$, pexct, pxout, pyout, pzout, pscool, strcantext, e$ ] ] else, [ pcan1, pbld, n$ ,psgcode, pexct, psccomp, pwcs, pxout, pyout,<--------- pzout, pcout, pscool, strcantext, e$#psgcode,######NOTE RAPID MOVE ######################### IF I CHANGE PSGCODE, TO "G01" IT REPLACE ALL THE G0 T0 G01, UNFORTUNATELY; I don;t want that , need g01 only in face mill contour (T5 OFFSET - 0 1/4 FLAT ENDMILL) N295 G0 T0505 N296 M43 N297 M111 N298 G97 S2139 N299 G0 G28 H0 N300 G0 G98 X-1.1718 Z.45 N301 C0. N302 G112 N303 G1 X-1.1718 Z-.0705 C.9853 F6.42 N304 G2 G42 X-1.2234 C.945 R.0625 N313 G3 X-1.3854 C.8864 R1.5124 N314 G2 G40 X-1.4776 C.8737 R.0626 N315 G0 Z.1795<------------------------------------ RAPID MOVE GO TO G01 Z.1785 F200. WITH FEEDRATE N316 X-1.1718 C.9853 N317 G1 Z-.341 N318 G2 G42 X-1.2234 C.945 R.0625

thanks you

hi need help how to out put " character example character in red N11 T1 M6 ; 1/2 FLAT END MILL N12 h1 N13 S16000 M3 N14 ;M59 N15 ;M61 N16 ( DIS," ******* MAX DEPTH = Z-.125 *****' " ) <<<<<<<<<<<<<< N17 G0 X.0085 Y-.0617 N18 Z.25 N19 G1 X.0076 Y-.0568 F150.

THANKS YOU Cathedral. it work

THE operator got use to NAT I TRY UNFORNTUNATLY, IT COME OUT NAT0001 fmt "NAT" 7 toolno1 #Tool number toolno = t$ * 100 + tloffno$ toolno1 = t$ #t$ #### MOD ADD LINE **** * ptoolcomment # pbld, n$,"G00","X20.","Z31.5" e$ pbld, n$,toolno1 e$ % (PROGRAM NAME = 10-32 FLEX ARM TAP) ( OKUMA 2 AXIS *JR*- DATE - APR. 21. 2015 ) G00 X20. Z31.5 G50 S1800 ( NAT00 CALL OLOAD ) M01 ( *** TOOLIST**** ) (TOOL = 1 OFFSET - 1. OD FINISH RIGHT - 35 DEG.) (TOOL = 3 OFFSET - 3. DRILL .159 DIA.) (TOOL = 2 OFFSET - 2. .125 THK GROOVE CUTOFF) (TOOL = 1 OFFSET - 1) (OD FINISH RIGHT - 35 DEG. INSERT - NONE) NAT0001 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< it should be NAT01 HELP PLEASE N1 G0 T0101 M42 M8 G97 S1500 M03 ( ******************* FACE*************** ) G0 X1.2 Z.02 G50 S1500 G96 S1000 G99 G1 Z0. F.005 X-.0313 Z.1 G0 Z.2

YES

HI need help how to add this line NAT04 DEF WORK PS LC,[0,0],[0,0] END DRAW N002G00 X20 Z31.5 N003 G50 S1800 (NAT00 CALL OLOAD) N004 M01 N005G00 X20 Z31.5 NAT04 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ADD THIS LINE N006 G97 S1000 M42 M03 M08 N007 (****************** FACE **************) N008 X1.168 Z0 T040404 N009 G97 S1000 N010 G01 X-.132 F.005 N011 Z.05 N012 G00 X19.968 Z19.984

please help mastercam prompt when post out enter pivot length tool for T2 4.775 i just want to add pivot length out put in the toolist (T2|1/4 FLAT ENDMILL |H2|D2|| DIA-.25 | *** PIVOT LENGHT =4.755 * **)

IN THE TOOLIST ORIGNAL POST OUT (T1|1/8 FLAT ENDMILL |H1|D1||TOOL DIA. - .125 ) I WANT TO ADD IN ** PIVOT LENGHT ** FOR EACH TOOL (T1|1/8 FLAT ENDMILL |H1|D1||TOOL DIA. - .125 , PIVOT LENGHT =4.5 )

hi all i edit a generic 5axis post b/c head/ head config FOR MACH 3 i would like the fq 2 toolength "Enter pivot length included tool for //t$//" use_tlength : 2 #Use tool length, read from tool overall length #0---- CHANGE #0=Use 'toollength' var, 1=Mastercam OAL, 2=Prompt out put in the header ex (T1|1/8 FLAT ENDMILL |H1|D1||TOOL DIA. - .125 PIVOT LENGHT =4.5 ) (T2|1/4 FLAT ENDMILL |H2|D2|| DIA-.25 PIVOT LENGHT =4.755 ) IF PIVOT LENGH ENTER =4.5 THAN = 4.5 IN IF TOOL 2 PIVOT LENGHT ENTER = 4.755= THAN= 4.755 WHEN IT PROMPT ENTER PIVOT LENGHT

thanks you.

hi we a milltronics cent 1 and cent iv control on the drill and tap it position it diffrent than fanuc. ex N1137 G0 G90 G54 X-5.3548 Y3.0783 S1800 M03 N1138 G43 H6 Z1. N1139 G98 G81 Z-.4 R.2 F15.625 N1140 X-5.1131 Y2.1856 G80 it should drill 2 holes; however; on the milltronics cent 1 and cent iv it rapid to X-5.3548 Y3.0783 (skip to the next hole ) X-5.1131 Y2.1856 and drill only 1 hole it only works if i have dulpicated position ex N1137 G0 G90 G54 X-5.3548 Y3.0783 S1800 M03 N1138 G43 H6 Z1. N1139 G98 X-5.3548 Y3.0783 G81 Z-.4 R.2 F15.625 ( duplicate X-5.3548 Y3.0783) N1140 X-5.1131 Y2.1856 G80 pdrill$ #Canned Drill Cycle pdrlcommonb pcan1, pbld, n$, *sgdrlref, *sgdrill, *pxout, *pyout, pfzout, # ( force out *pxout, *pyout ) and it not coming out prdrlout, dwell$, *feed, strcantext, e$

thanx you. i use the 2 check box for plunge . it works ,close enough

yeah, i know it crazy, however; it work on this old controler cms router. allen bradley (osai) 10feet x 6 feet table 2 head twin spindle . program written to the center, we use machine comp for ex; 6 x 4 rectangle t1m6 s18000 m03 h1 ( h= height offset "z" and tool dia offset "D" ) go g42 x-.1 y0. g0 z.2 g1 z-.25 f30. x6. f150. y4. x0 . y0. g0 z.2 g40 we use machine comp if t1=.5 dia offset tool table dia =.5 this control it old, the offset tool parameter it take positive # only can't be - (negative ) if the part come out .01 bigger , in the tool table offset can't take negative number. if program to the ( computer ) comp. we array and nest alot of pcs . we comp in rapid move before enter the g01 plunge that why we program to the center of the part and use machine comp. if the part .01 bigger , we adjust offset tool talbe. offset dia=.49 yes, i had been teach different way, im new at this company have to fallow their rule. they use camworks and their post come exactly what they requested . im a mastercam (new seat) try to write the post to match their post.

HELP PLEASE

hi it there a way to force G COMP ON RAPID MOVE N19 G00 G42 X1.2813 Y13. ** G COMP 42 OR 41 N20 G00 Z.2 N21 G01 Z0 F30. N22 G01 X.7813 Y13. F150. N23 G02 X-.2188 Y14. R1. N24 G03 X-27.7813 R-13.7813 N25 G03 X-.2188 R-13.7813 N26 G01 X-.2161 Y14.15 N27 G00 Z.2 N28 G40 I TRY TO FORCE OUT , however IT ONLY COME OUT G40 pcan1, pbld, n$, [if gcode$, *sgfeed], *sgcode, *sgabsinc, pwcs,*sccomp, pfxout, pfyout, pfcout, e$ # first rapid fr tool change