greg@kohler
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by greg@kohler
-
-
Thanks gcode that did the trick.
-
I'm trying to post a file and the arc center points are not posting correct.the start and stop points of the arc are correct is there a setting in the post that maybe wrong .when i looked at the post it is set for arc centers to be abs .any help would be great
thanks
Greg
mx5 mu1
-
Today it started to give an error message that it is a file from a newer Mastercam version or a file not recognized by Mastercan. The file i am trying to open was just created in mcx4 10 minutes ago.When i saved the file it took a long time to save. I have mcx4 loaded for over a week with no problems. Has anyone else had this happen to them. The guy on dayshift said he also had the same problem.
thanks greg
-
Cherokee,
Have you looked for the recommeneded chip load and SFM for the grade of inserts you have. I have cut many hardened parts this way and have had great luck with it.
good luck
Greg
-
Steve,
Are talking about a post for an old bridgepot. We got a post for our machine form our reseller.
------------
Greg
-
cris
could you maybe go back to a back up point on your hard drive just.
-
I am trying to post multiple tools in mr2 and only one tool is posted at at a time it prompts for a new program name for every tool.If i do multiple toolpaths with the same tool it will post all the toolpaths. It is only when multiple tools are used it will not post all the tools. Is there a setting that i missed to stop this problem or is something in the programing that is different in the new release.
ProE Creo converter
in Industrial Forum
Posted
We are having troubles converting Creo files in to Masctercam X6 . When we open the files sometime it comes in as a solid and other times it wants to convert it to surfaces and only some of the surfaces are there.We have the converter from Mastercam. Our ProE guy says it's a Mastercam problem. I was wondering if anyone else is having this problem. Thanks for your input.