Thanks mate Found it

Cheers

Hi John,

Can't find it,Can you send me Please

Thanks

Sheldon

Hi Guys,

Can anyone send me an electronic copy of mastercam X manual on my email [email protected]

thanks

Sheldon

Hi,

Camplete is good,the software is called Truepath, i am using it for quite some time,you can see the toolpaths,the machine as how it is actually going to run,collision control,you can make you own tool holders,own tools,it does toolpath optimisation,i feel that if you are going for a mikron 5-axis,truepath is the best.

thanks

Sheldon

Hi Guys

Is there a way to check to the point data with the surface and print out an excel or a word document in Version 9.1

thanks

Sheldon

Hi guys,

i have a mpbosto post which i need to modify to get R for rapid and instead of feed like F500.,i want it to be feed variable like FV50.

i need to use a flat endmill and do 4-axis milling and the software donot allow me to do this.is there a way to use a flat end mill for 4- axis milling.

Hi guys,

is it possible to create a 4-axis program with a flat endmill on V9.1

hi,

i have a line with G41 and xyzij on the same line,how can i go,is it the post or some thing what i need to take care while making a contour toolpath

--------------------

Hi All,

when i use a contour toolpath using cutter comp. on the haas machine it gives an error and the progrom doesnot run but when i verify in mastercam the tolpath runs.i had changed the lead in and i had also put the arc move greater than then the tool diameter.can your help me in this problem.

Thanks

hi,

when i post files at the start of the program it gives g28 and at the end it gives g28 camand i donot want that as my machine goes to home position.Can youall help me in editing the post.

thanks

Hi c,

thanks for the info,it works

hi guys,

i have a problem on the haas machine,when i post a g-code with a cutter comp on,it doesnot accept the prg and shows an error,i had posted on a mphaas.pst,on the machine the tool radius was feeded but it still shows an error.can your guide me.

thanks

THANKS JOHN

I WANT BUT WITHOUT I,J,K

how can i eliminate i,j,k move an replace them with x,y,z in mpfan post processer