Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi,
Camplete is good,the software is called Truepath, i am using it for quite some time,you can see the toolpaths,the machine as how it is actually going to run,collision control,you can make you own tool holders,own tools,it does toolpath optimisation,i feel that if you are going for a mikron 5-axis,truepath is the best.
thanks
Sheldon
i need to use a flat endmill and do 4-axis milling and the software donot allow me to do this.is there a way to use a flat end mill for 4- axis milling.
hi,
i have a line with G41 and xyzij on the same line,how can i go,is it the post or some thing what i need to take care while making a contour toolpath
--------------------
Hi All,
when i use a contour toolpath using cutter comp. on the haas machine it gives an error and the progrom doesnot run but when i verify in mastercam the tolpath runs.i had changed the lead in and i had also put the arc move greater than then the tool diameter.can your help me in this problem.
Thanks
hi,
when i post files at the start of the program it gives g28 and at the end it gives g28 camand i donot want that as my machine goes to home position.Can youall help me in editing the post.
thanks
hi guys,
i have a problem on the haas machine,when i post a g-code with a cutter comp on,it doesnot accept the prg and shows an error,i had posted on a mphaas.pst,on the machine the tool radius was feeded but it still shows an error.can your guide me.
thanks
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.