ckarner
-
Posts
10 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by ckarner
-
-
Can someone help with this
I was using the compare to STL feature with MR1 and when I went to M2 and now X2 it still doesn't work?
-
hjfgjllk
-
You may have to Create,Curve,Create curve on all edges to get started
I would use a new level
Some .STP and .IGS have a hard time in solids if not saved right at your customer.
-
we found the problem with the compair to stl
he had his Display speed--- Quality at 1/2.
At full quality on the display, all is good .
Thanks for all the help
-
I am running SP1 and the one that is having the problem is on MR1 we are going to try to se if it works in my box
-
Thanks , then we must have a problem on this end
-
Do you find the "compare to .stl" has a hard time with bull nose cutters and is not accurat?
-
Good Luck let us know what you end up doing.
-
You should be fine, just some reaching problems that will only change your feeds and speeds. And yes move that tool back befor rotation moves. Go for it you will add that to your list of machines you can program.
compare to STL file
in Industrial Forum
Posted
If I have Zero stock on surfaces in my parameters for the cut, the varify thinks I have plus .020 or even more. Even if I have the toolpath go to
-.020 stock it thinks I have .020 or more the color code never showes any violation of my part