We use a different cad/cam package for our intergrex, when you post, in native mazatrol it is a print out of what to input at the control. pretty much what numbers param, to input.

whatcha yall talking about.....? I aint seen nothing like this in a while. im just sitting here having some pizza learnin about gramar!>!

We cut alot of oxyfree copper here at the lab, i would say about 80 percent of out work. The rocket nerds like it for its heat properties. When ever there is a call out for a percise hole, we center drill so that the countersink is equal to the dia of the margins on the drill. Then drill under size and use a reamer....

Hello.... welcome...

me i hate 6061, my last base i made parts for F-15s they were all 7075-T7351 but anyways, here all we cut is 6061 using valenite v590 indexable mills.

sweet mplmaster post would be cool, we are in the process of trying to purchase a new haas lathe to replace our quickturn that just died...

Sup G.....

like john said, thanks for asking!

lol its friday its cool.....

all work and no play makes Dave Thompson a dull boy all work and no play makes Dave Thompson a dull boy

all work and no play makes Dave Thompson a dull boy

all work and no play makes Dave Thompson a dull boy

all work and no play makes Dave Thompson a dull boy

all work and no play makes Dave Thompson a dull boy

all work and no play makes Dave Thompson a dull boy

all work and no play makes Dave Thompson a dull boy

all work and no play makes Dave Thompson a dull boy

pretty cool chris..... can i have your autograph?

um linky!!!

cool are you going to diseny world?

if you have to use a cutter that small ramp it.... we do alot of deep small oring grooves, ramp every one of them less chatter and stress on the tool... works everytime.

bellyup i cant read so i was just talking lol....

I hope in the future mastercam will be able to make me coffee, and change the channel on my tv! that would be awesome

Thanks

I have had this problem, i delete them and then undelete the entities, then i could move them and analyze them... worked for me....

Lucky! you gonna take it off any sweet jumps?

Well i first learned another unamed cad/cam program then started in with mastercam, we have tried others, but we always go back to mastercam. In my opinion it is the easiest to learn and work in...

LOL john isnt everything better than Internet Exploder....

we had similar trouble at one of my previous asignments.... it turned out to be an bad servo

controller card...

mastercam is like steak you cook it till its just right, then you eat... yummy.....

lol is that an owl....

nope never had that problem... have you tried backing up your files and reinstalling?

stork man.... tshirt?

i love my new mouse pad lol