Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
We use a different cad/cam package for our intergrex, when you post, in native mazatrol it is a print out of what to input at the control. pretty much what numbers param, to input.
We cut alot of oxyfree copper here at the lab, i would say about 80 percent of out work. The rocket nerds like it for its heat properties. When ever there is a call out for a percise hole, we center drill so that the countersink is equal to the dia of the margins on the drill. Then drill under size and use a reamer....
all work and no play makes Dave Thompson a dull boy all work and no play makes Dave Thompson a dull boy
all work and no play makes Dave Thompson a dull boy
all work and no play makes Dave Thompson a dull boy
all work and no play makes Dave Thompson a dull boy
all work and no play makes Dave Thompson a dull boy
all work and no play makes Dave Thompson a dull boy
all work and no play makes Dave Thompson a dull boy
all work and no play makes Dave Thompson a dull boy
if you have to use a cutter that small ramp it.... we do alot of deep small oring grooves, ramp every one of them less chatter and stress on the tool... works everytime.
Well i first learned another unamed cad/cam program then started in with mastercam, we have tried others, but we always go back to mastercam. In my opinion it is the easiest to learn and work in...
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.