Hey Gunther,

 

We currently use the tool list, but now we installed a server. When I use the tool list I dont get any picture to show up, my screen shot nor my logo show up. If I use the set-up sheet I get the pictures which is fine to use but then it shows the tool for each operation. Can I change it to only show each tool once like the tool list does? Or is there a way to get my pictures back for the tool list now that I ain't saving the files locally? Any help is greatly appeciated!!

 

Thanks,

Mark W

Try saving the tool list, close then reopen the saved tool list. This has worked for me in X5 and others for getting the icons to show up.

6 min 1 sec

Dell Precision 670

X4 MU2

XP PRO 64

Dual Xeon 3.20GHz

4GB DDR2-400 PC2-3200 ECC Ram

80GB 15k HDD

Quadro FX 1400

I need faster what can I do?

WHAT ARE THE SPECS. ON THE FASTEST YOU HAVE BUILT AT S4A?

WE LIKE THE 2 WE HAD BUILT.

BUT I WILL BE STARTING SOMETHING ON MY OWN IN THE NEXT YEAR AND WILL HALF TO BUY A NEW ONE FOR MY SELF.

SO "IF" MONEY WASEN'T AN ISSUE, WHAT IS THE FASTEST COMBO OUT THERE

REGEN 1 MIN 21 SEC

MY BAD

RETRY AT .0001

NETED: 9 MIN 12 SEC

1 MIN 17 SEC

DESKTOP

AMD ATHLON 64 4000+

2GIGS OF KINGSTON PC3200

XP PRO

NVIDIA QUADRO FX 1400

DUEL 10K WD SET TO RAID 0

ASUS A8N-SLI PREMIUM MOTHER BOARD

RUNING MCAM X2 MR2 SP1

PC BUILT BY S4A

1 MIN 17 SEC

DESKTOP

This is what I have been doing to change the machine group with out adding then deleting a group.

In the operations manager open the machine properties.

Click on the "files" folder then the machine group properties box will open.

Click on the "replace" folder in the machine- toolpath copy field.

Next pick the .MMD file that you want.

Then click done.

You will see the machine def. is changed

i have all that set but still a no/go comes up with (MILL 5 - AXIS TABLE - HEAD VERTICAL.MMD)

not that either

must be doing some thing wrong. Ware am I adding in the command line argument? I tried at the end of the "target" box under the desktop icon properties, that didn't work

sorry, thanks

ON START UP, I ALSO HAVE MY START/EXIT SETING SET FOR THE MACHINE THAT I WANT. I WOULD LIKE TO START MASTERCAM AND HAVE MY MACHINE SET.

X2 OPENING WITH A DIFFERENT MACHINE THEN THE DEFAULT IS SET TO. MY DEFAULT MACHINE LIBRARY IS SAVED ON MY NET WORK NOT ON MY C DRIVE. I TRIED SAVING A COPY TO THE C DRIVE BUT STILL OPENS WITH A DIFFERENT MACHINE. RUNNING XP PRO. ANY IDEAS WHAT THE PROBLEM IS ?

in v9.1 or v10 using rotary4ax axel cut it doesn't seem to be able to use check surfaces and the rotary cut dose.

does anyone know anything about this. I am making a rotary die using solids.

[ 04-13-2006, 01:09 PM: Message edited by: DANC ]