Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi friendz
I am a silent member in this forum. I need some Help. I am posting some other softwere in that I don't get for feed rates point ( i need F500.0) but i am getting (F500) but here is My FANUC-OM machine will accept feed rates F500.0 if you give F500 it moves in microns. Is there any option to change in parameter bit to omit the points.
Hello friendz
In HASS vf 0.0 m/c I am able to get the program from machine to Pc , but here the problem is i am unable to get program from Pc to Machine. pls help me to comeout this problem
Thanks & regards
simon peter
Hello friendz
#1 I have fanuc OM control machine( super max) in this we can lock & un lock(edit) 9000 series programs. all these things controlled bye parameters. if you don't mind let me know the parameter number.
#2
supermax (fanuc control OM) in this i having facing problem i,e
for eg.
My program is containg 4 tools I used G54. after completion of the T1 I moved the axis (disturbed axis but not work offsets) , Then if I start the without sending Zero Return but it dosent go to the G54 positions it will start from where i moved the axis. due this there are lots of chances to crash the machine. is there any solution to avoid this
thanks
simon peter
[email protected]
Dear Jimic
The differnce between filterd toolpath & without filterd toolpath is
filterd toolpaths:
in radial surface toolpath, you will get X Y R, or X y I J values, due to this the program lenthe will become small, and no jerks while moving X Y coordinates. surface finish will be good.
Withou Filter toolpaths:
in radial surface toolpath, you will get X Y values only, due to this the program lenthe will become big, and there may small jerks while moving X Y coordinates. surface finish will be no good.
Dear friend
I am very thankfull to suder, yogesh & david for giving an idea to solve my problem. i solved it
once again thanks friends, this mastercam forum bbrought us as friends.
bye
peter
Dear friends
In Mastercam I am facing a problem i,e while posting (MPFAN) 2D circle I am getting R or I J values, I dont have any problem in 2D but i have problem that is while posting tapered hole or tapered bore i am not getting R or I J values , only I am getting all "X Y" coordinates, due to this my program lenght is too big. so, I need like X Y R or X Y I J values. please anybody have FANUC POST processor which will give R or I J values in 3D programming.
pls send to me that post processor to my mail
[email protected]
thanks
simon peter
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.