Most machines with fanuc controls will use par. 4077 for spindle orientation position. If you have the G10 option on your control you can simply put a statement before your canned cycle saying G10 L50 N4077 R(value of par 4077 plus or minus 900)then G11 on the next line.This will shift the orientation position by 90 deg. in the cw or ccw direction. 1800 will shift by 180 deg. etc.etc. Be sure that after your canned you use the same statement to shift 4077 back to it's original value, or if the machine has a tool changer it "will" wreck it.

I have an open house coming up where I have to demo some new machines.I'm looking for a drawing or model of a single turbine blade preferably something that could be made from a piece of stock in the 2 to 5 inch diameter range the exact shape does not matter much as this is just for a demo.If anyone has a sample drawing I could slap a tool path on, it would be greatly appreciated.