havine a prolem trying to program these feeder spacers im working on. pretty much there 6" round and they have 96 60 degree teeth all the way around the outside with a hole throught the middle om putting them on my A axis on a mandril. my problem is im using MX2 level 1 and im trying to cut this with a 60 deg dovetail cutter thats been ground to spec. what i need to do is bring my cutter to the side of the stock and go down then rotate then go back. all i have been able to get is where the tool is perpendicular to the part and rotating around. which would be fine it i was using a endmill style cutter but not for this aplication. thanks in advance for the help