Hi, there any body can send me a full sample or post block example for machine simulator (Camaix). I have download and install the file from Camaix. I have draw my machine in STL . I do the configuration in machine def. like I see in video tip from MC. I don t know what I have to put in the post ? Did we need a XML file? Now I still have this alarm! ------------- NC file path is not determined in the setting file. Simulation file could not de loaded. ------------- Thanks

Hi guys Question for material library, If I have a welding part and this part have two different material ,It is possible to use two different materiel library in the same program ? This is for the same tool and I use it in operation back to back . Thanks

Thanks i gone a try this.

OK thanks I have install X2 this monday and i dont see the file mcamx2/moduleworks/machsim ,did the new version use the same way for the simulator ? C hook and machsim.dll !!! and where he put the confiuration for the machine. Maybe we have to install that like we do for X mr2 !!!

Hi Dave This code is from a Camaix document and he taking about a file parameter ,i thinking i have to put in the post,but i dont see anything in the Mpmaster_3ax.pst(# Buffer 10 - Machine Simulation #machsim)you post.Maybe its only when you use a Camaix post !!! ---- For using the simulator we need to have ??? XML.File STL.File and the section of -[# Buffer 10 - Machine Simulation #machsim]i cut and past in the post that it or i need anything else? This is what is write in this document !!!! In the parameter file are listed up the post processor driver parameter. They are very important for the functionality of 5AxVM. The parameter file needs to match with the definitions in the .xml file. Parameter to be defined: 1. Spindle Direction 2. Axis Setup 3. Machine Type Setup 4. Setting distances between axis 5. Proper geometry setup for all machine components 6. Selection the machine tilting mode and tilting direction 7. Millturn 8. Metric/Inch ETC...... Thank for your help and i hope you have some answer for me!!!

Hi Im a new user of Mastercam and i look for information about how to put parameter for simulator Camiax in a post of Mastercam Ex: VEKTORFX VEKTORFY VEKTORFZ ETC. There anybody can give me a exemple where to put that in the post of Mastercam. Thanks a newbie

Hi everyone! It is possible to put two STL files for stock setup because i have a job with two workpiece. Milling operation in a 4 axes Thanks