Thanks Terry, for the explanation.

Hello! Im new about this term "indexing" could someone explain this term for me,I would appreciate any help.

Is there Anyone can help me how to integrate the set up data from mastercam to windows excell?What i mean to run the setup information into another application. I would appreciate any help . Thaks!

Good day! Sometimes i work on surface modeling especially when i use the surface to surface fillet function, I found out there is something wrong with this function oftentimes it wont trim the other set of surfaces even if i tick the both trim surfaces option, about the normal no problem coz i set properly so meaning everything is set to right option but still it wont trim the surface. What should i do this problem? Will somebody here could help me on this? I appreciate any advices or help. Anyway i use mastercam version 9.1

Ok! John i will try it! Thanks !!!!

Hello! john im referring to peck drilling,treading,and others sample for me to have an idea as a reference using carbon steel material or any material. What is your advice about this.

Anybody here can help me find drilling samples, specially websites for drilling,tapping or any hole processing. Any help iwould appreciate. Thanks!

Thanks to you guys! it does really help me.

Hello Guys, Pls,Is anbody here can give any sample of Mastercam various drilling cyle samples for reference only? Im not really familiar with drilling cycles, any help is a big thing for me and i appreciate any assistance. Im using mastercam version 9. Thanks in advance.

Sorry guys for not being specific, well im referring to a surface finish toolpath such as shallow,contour and the rest and i use mastercam version 9.Is there a solution about this? Thanks!

Hello! Is anybody here can help me how to speed up a toolpath regeneration with a total tolerance of .001? It seems a very long time to regenerate this such kind of situation. I would appreciate any help to solve this kind of problem. Thanks in advance.

Is there anybody can help me how to fillet a surface effectively, i mean the suface fillet command not solid fillet. Sometimes when i fillet a surface especially a free form surface the result is unsual, why because the other surface it wont trim even if i tick the option trim both surface. Can you help me about this problem? I use Mastercam v9 and also i check the normal its ok still it wont trim.

Im using mastercam version 9.0, okay i will follow your advice guys!. Thanks!!

Hello! Does anbody here can help me about drilling specialy mastercam drilling cycles step by step, im new in drilling or could you give a site about free basic drilling tutorial. Pls, if anybody could help, i would appreciate any.

Hello! Is there anybody here can help me how to eliminate multiple retractions on surface finish shallow toolpath using complex solid model, i tried all the settings just to eliminate this but still many retractions visible. Actually, I dont like toolpath with many retractions.Pls help me out.