We got some great responses via e-mail - thanks very much! CNCApps - we're happy to wait. Thanks for looking into it.

Hi all, Just a few comments: - Chipmaker; we're definitely looking for pictures. Eventually we'd like to get part files, but we'll worry about that once we speak with you directly to make sure that we're not violating anything proprietary, sign any forms you'd like us to sign, etc. - CNC Apps; thanks, I look forward to seeing it! - Neurosis; we do appreciate the input, and are constantly - constantly - striving for improvement. Your posts above were sent around internally - they do get read and they do contribute to CNC's decisions. - Mick; thanks for the backup! Ben Mund

Hi all, We're always on the lookout for interesting parts that were programmed with Mastercam. We use these for photograophs and to spotlight the work of the Mastercam community. Once every two weeks or so, we'll be be asking about specific types of parts. If we use your parts, we'll send you a "thank you" pack. We're not sure what will be in it yet, but we'll let you know as we go along. Any parts you submit to us will not be sent outside of CNC Software. We'll only be using them for photography, screen shots, and possibly internal test cutting. ----- So, first up - Medical parts! If you have any medical parts you'd like to share with us, please e-mail us at [email protected] . ----- (Note: We'll need your explicit permission before we use the parts for anything, so we'll be following up with you). Thanks!

Hi all, CNC Software is looking for a Mastercam user who is successfully working with the HSM toolpaths and is willing to speak with Modern Machine Shop about it. If you're interested, please drop me a line at [email protected]. Thanks! Ben Mund CNC Software

Hi everyone, Thanks for the sharp eyes. North American Tool & Moldmaking accidentaly ran a portion of our IMTS release where we were previewing X. Although there was a "please do not use after" date on the release, that sometimes gets overlooked. They stripped out the reference to IMTS, edited it down, and ran it. Sorry for any confusion! Ben Mund CNC Software

Hi everyone, Sorry for the accidental “spam" from MastercamZone. We were preparing to send out an X Bulletin, and due to a problem with our provider, the trigger got pulled prematurely. In any case, it was sent out to about 50 people, many of whom were on the forum. Thanks very much for posting the problem, and again, sorry for any confusion. Best regards, Ben Mund CNC Software